KanexPro EXT-AVIPH264RX NetworkAV H264 HDMI Receiver

The KanexPro EXT-AVIPH264RX is a DHCP enabled AV over IP receiver with HDMI output to display and Ethernet. This receiver over IP uses advanced H.264 compression algorithm to transmit full HD 1080p from HDMI based displays with less bandwidth over LAN network. It'supports PoE (power over Ethernet) with distances over a single CATx up to 394 ft. (120m) delivering one to one, one to many and many to many over the Ethernet switch.
Ideal for digital signage and networked AV applications where full HD 1080p can be passed over IP network delivering full audio, video, power, data and control using a single Ethernet cable.

Key Features

• Decode & extend pure 1080p resolutions up to 394' / 120 meters
• Features real-time AV coding and decoding to broadcast 1080p
• H.264 Compression technology
• Can be used with DVI connection
• Supports one to many, many to many and point to point broadcasting
• Dual power input: 802.3af compliant w/ POE & DC 5V
• No power needed when connecting through a POE network switch
• Can be cascaded to multiple extenders
• Supports LPCM audio format
• Smart IP Address Setting: Dynamic Host Configuration Protocol (DHCP)
• Wide-band IR pass through to control the source (38khz to 56khz)
• Bi-directional UART/RS232 (Up to 115200), use remote controller to select 8 group Baud rate
• Supports one to one, one to many, many to one, many to many modes, with large cascading
• Power over Ethernet will be supported only with a PoE enabled network switch

Technical Specifications

Performance
Protocol: H.264 encoder over TCP/IP
Supported Video formats: 480i/480p/576i/576p/720p/1080i/1080p@60HZ
Supported Audio formats: LPCM, Audio sampling rate 48KHz
Streaming Bit Rate: 15Mbps
HDCP Compliant
IR Frequency 38 -56 KHz
RS232 Baud rate: Default 2400bps, total 8 options
Default IP:
TX: 192.168.1.11
RX: 192.168.1.12
Group ID Group 00 ~ group 63
Request for Switch/Router Support: IGMP, supports DHCP
Connectors on Transmitter
Input 1xHDMI Female port
Output 1x RJ45 output, 1x HDMI looping output
RS232 Phoenix RS232 port IR IR TX port (Support 38K-56KHz)
IR Ext port (Support 38KHz)
Connectors on Receiver
Input 1xRJ45 input
Output 1x HDMI Female port looping output
RS232 Phoenix RS232 port
IR IR RX port (Support 38K-56KHz)
IR Ext port (Support 38KHz)
Environmental & Power Requirements
Operating temperature: -5 to +35 C (+23 to +95 F)
Operating Humidity Range: 5 to 90%RH (No Condensation)
Power supply: DC 5V 1A
Power consumption: Max 3 watts
Physical Dimensions:
Tx: 119x79.5x28mm
Rx: 119x79.5x28mm
Net Weight TX: 0.28Kg RX:0.28Kg
Supported Input Resolutions:
50HZ: 576i/576P/720P/1080P/1080i
60Hz/59.94Hz: 480i/480P/720P/1080P
30Hz/29.97Hz: 1080P
24Hz: 1080P
25Hz: 1080P
VESA Resolution:
50Hz: 576i/576P/720P/1080P/1080i
60Hz/59.94Hz: 480i/480P/720P/1080P
30Hz/29.97Hz: 1080P
24Hz: 1080P
25Hz: 1080P